Specifications
Safety Recalls
Agricultural tractor
Known Issues
Possibility for the circlip assembled on the 4-wheel drive clutch to come out of its housing during heavy load application. The consequence, if the stop ring disengages from its groove, is a potential extension of the tractor stopping distance when the tractor speed exceeds 30 km / h.
Verlängerter Bremsweg bei höheren Geschwindigkeiten aufgrund einer Fehlfunktion des Allradsystems.
Injector experienced failure or issues after approximately 22 years of service on a Valtra 700 tractor.
Tractor displaying error code L302 indicating low fuel pressure after filters. Engine lacks power and intermittently enters limp mode. Issue is intermittent but worsening over time.
We are trying to operate a WS102RS wood chipper with our Valtra N121. But when starting the machine the safety/shear bolt (M8) breaks very easily. Even at lowest engine RPM and 540 PTO (the machine supports up to 1000) the bolt breaks. The wood chipper is completely empty and nothing is blocking the rotor. The acceleration speed of the PTO is simply too high, which causes excessive torque. When the bolt doesn't break during the start, we can work with the machine without problems. Is it possible to lower the acceleration of the PTO on this tractor. Or could something else be wrong?
Market Value
Hours Benchmark
Unlock Full Valtra T254 Report
Get the complete breakdown: pre-buy checklist, component reliability,5 recalls, 12 known issues, comparable sales, and theft risk analysis.
One-time payment · Instant access · Secure checkout