Massey Ferguson 1532

MASSEY FERGUSON MF7718-4CVT MF7718-4D MASSEY FERGUSON SA （Japanese Importer :MSK Farm Machinery Corporation CEO Zenta Ishikawa） SUMMARY

24 MASSEY FERGUSON MF7718S-4D MASSEY FERGUSON (Japanese Importer :MSK Farm Machinery Corporation) SUMMARY

17 MASSEYFERGUSON MF5713SL MF5712SL MF5711SL MASSEY FERGUSON （Japanese Importer :MSK Farm Machinery CorporationCEO Saito Yoshiyuki） SUMMARY

MASSEY FERGUSON MF7726S-4V MF7726-4CVT MF7724S-4V MF7724-4CVT MF7722S-4V MF7722-4CVT MF7720S-4V MF7720-4CVT MF7718S-4V MF7718-4CVT MF6718SS-4V MF6718S-4V MF6716SS-4V MF6716S-4V MF6714SS-4V MF6714S-4V MF6713SS-4V MF6713S-4V MASSEY FERGUSON （ Japanese Importer :MSK Farm Machinery Corporation) SUMMARY

8 MASSEY FERGUSON F716VARIO T4 F718VARIO T4 F720VARIO T4 F724VARIO T4 MASSEY FERGUSON SA （Japanese Importer :MSK Farm Machinery Corporation CEO Zenta Ishikawa） SUMMARY

After tractor rolled and was pulled back to running condition, bright white smoke pours from exhaust until reaching temperature, then blue-tinged white smoke occurs intermittently at higher RPMs (2000+). Fuel injector cleaner added with no improvement.

Hey All, Just finished rolling my MF 1532, luckily no injuries. Wasn't able to shut it off until after it stop its roll. It has a custom cab on top which prevented it from fully rolling over and it landed on it's left side. Long story short after 24 hours and a pull of the glow plugs later, the tractor is running again. But what looks to me like bright white smoke pours out of the exhaust until the tractor has reached temperature. At this point only higher RPMs (2000+) will cause more white smoke intermittently. For note: Dad thinks the smoke has a blue hue to it, but my wife and I don't see it. What do you guys suspect broke during the roll and would cause white or possibly blue smoke? Am I safe to continue using the tractor in this state? For note, I have added fuel injector cleaner into diesel tank with mostly no results. That was the first google recommendation... Looking forward to what you guys think!

Hey All, Long story short, I rolled my MF1532 earlier this year, attempted to start it once stood up, and am attempting to fix the issues hydrolocking the engine caused myself. After purging the oil from the tractor cylinders and getting it running again; it started blowing white smoke... a lot of it, with some random pinging noises to go with it. Lacking the testing tools for cylinder compression tests etc, I chose to tear the motor apart. I've got the head off and can visually see that piston 1 is not rising to the top of the cylinder (missing by just over 1mm). I assume that likely means the connecting rod under the piston is bent? If so, am I, a not mechanic, going to be able to replace the connecting rod myself? Any help would be appreciated!